What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Forumsregeln
Bitte beachte die Forumsregeln!
Bitte beachte die Forumsregeln!
What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
So, isn't this part really available anymore? If not, isn't there any replacement for it?
http://www.fischertechnik-museum.ch/mus ... 22&pos=157
Thanks in advance,
http://www.fischertechnik-museum.ch/mus ... 22&pos=157
Thanks in advance,
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
This part has never been widely available, and if, only in small numbers for specific usage.
Getting a few of them isn't impossible, but if you require large amounts, you will have to be patient and willing to spend.
Taking a normal S-Riegel and cutting off part of it mostly fulfills the purpose too.
Getting a few of them isn't impossible, but if you require large amounts, you will have to be patient and willing to spend.
Taking a normal S-Riegel and cutting off part of it mostly fulfills the purpose too.
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Thanks for the response. I remember saw some 3-D printed equivalents somewhere, but unfortunately I don't have acess to a 3D printer so this is not an option for me right now. Cutting a part of the S-Bolt / S-Rivet / S-Riegel actually crossed my mind, but I feel the rim is too thin (just 1.2 mm) to cut a groove on.
If anyone did that already, I'd very much like to see some results if possible!
If anyone did that already, I'd very much like to see some results if possible!
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Hallo,
Fischerfriendsman hat noch einige, offiziell aufgeführt, 14 Stück.
https://www.fischerfriendsman.de/index. ... he&s=37232
Für mehr einfach anfragen, vielleicht hat der gute Mann noch welche in petto.
Evtl. hier noch 37 Stück:
https://www.fischertechnik-teile.de/epa ... ring=37232
Hier 20 Stück:
https://www.ebay.de/itm/324318791756
3D-Druck:
https://www.thingiverse.com/thing:2828906
Fischerfriendsman hat noch einige, offiziell aufgeführt, 14 Stück.
https://www.fischerfriendsman.de/index. ... he&s=37232
Für mehr einfach anfragen, vielleicht hat der gute Mann noch welche in petto.
Evtl. hier noch 37 Stück:
https://www.fischertechnik-teile.de/epa ... ring=37232
Hier 20 Stück:
https://www.ebay.de/itm/324318791756
3D-Druck:
https://www.thingiverse.com/thing:2828906
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Hello I still have about 20 pieces in stock
greetings
Lothar
greetings
Lothar
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Karl and Lothar, I'd probably spend much more on delivery than on the parts themselves (I live very far from Germany) but it's an option to consider anyway.
Thanks for your answers!
Thanks for your answers!
- PHabermehl
- Beiträge: 2439
- Registriert: 20 Dez 2014, 22:59
- Wohnort: Bad Hersfeld
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Hello rubem,
As Karl indicated, I made a 3D print replacement, to be found at
https://www.thingiverse.com/thing:2828906
I would print some for you, but ... as you pointed out, shipping may be costly. Maybe you know someone or do have access to a 3d printer yourself.
Kind regards
Peter
As Karl indicated, I made a 3D print replacement, to be found at
https://www.thingiverse.com/thing:2828906
I would print some for you, but ... as you pointed out, shipping may be costly. Maybe you know someone or do have access to a 3d printer yourself.
Kind regards
Peter
-
- Beiträge: 472
- Registriert: 03 Jan 2018, 22:04
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Die Sechskant-Variante ist cool!
Ist der Riegel oben rechts (erstes Bild) bzw. 3. blauer Riegel (4. Bild) mit Innensechskant? Wozu dient das Loch? Um Kabel hindurchzuführen?PHabermehl hat geschrieben: ↑22 Jan 2021, 21:04As Karl indicated, I made a 3D print replacement, to be found at
https://www.thingiverse.com/thing:2828906
Danke & viele Grüße
Lars
-
- Beiträge: 472
- Registriert: 03 Jan 2018, 22:04
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Wer lesen kann… "nut wrench for the redesigned part".tintenfisch hat geschrieben: ↑22 Jan 2021, 21:45[...]
Ist der Riegel oben rechts (erstes Bild) bzw. 3. blauer Riegel (4. Bild) mit Innensechskant?
Bliebe noch die Frage nach dem Loch
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Hlallo,
Man kann die Riegel daran am Schlüssel einkleben oder nur den
Schlüssel am Halsband damit er nicht verloren geht.
2. Streichholz oder stärkeres Material falls zu schwer zu drehen
3. zum sicheren Aufhängen der Bautele ähnlich einer Hängeleine
optisch korrekt mit eingeklebtem Riegel für Statikteile.
1. für ein Perlenband, spezielles Halsband mit Bauteilen für FischertechnikerBliebe noch die Frage nach dem Loch
Man kann die Riegel daran am Schlüssel einkleben oder nur den
Schlüssel am Halsband damit er nicht verloren geht.
2. Streichholz oder stärkeres Material falls zu schwer zu drehen
3. zum sicheren Aufhängen der Bautele ähnlich einer Hängeleine
optisch korrekt mit eingeklebtem Riegel für Statikteile.
- PHabermehl
- Beiträge: 2439
- Registriert: 20 Dez 2014, 22:59
- Wohnort: Bad Hersfeld
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Es ist ganz einfach: der Schlüssel brauche einen Griff, der Torus war in FreeCAD mit einem Klick erzeugt...
Ende.
Gruß
Peter
Ende.
Gruß
Peter
-
- Beiträge: 472
- Registriert: 03 Jan 2018, 22:04
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Desillusionierend…PHabermehl hat geschrieben: ↑22 Jan 2021, 22:50Es ist ganz einfach: der Schlüssel brauche einen Griff, der Torus war in FreeCAD mit einem Klick erzeugt... Ende.
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Maybe good to know for you:
Fischerfriendsman Stefan Roth also offers a shipping service.
When you buy parts from him, you can also get other stuff shipped to him and he will ship it all as a single parcel.
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Hallo,
der 37232 Verschlussriegel 4 rot würde für mich noch mehr Sinn machen, wenn der runde Kopf an ihm (nur) so groß wäre, wie die Senkung in einer Strebe.
In einem solchen Falle wäre dann auch zu überlegen, ob hierzu als Antrieb/Mitnahmeprofil statt eines Schlitzes ein Innensechskant zur Werkzeugaufnahme besser geeignet ist.
Gruß
Lurchi
der 37232 Verschlussriegel 4 rot würde für mich noch mehr Sinn machen, wenn der runde Kopf an ihm (nur) so groß wäre, wie die Senkung in einer Strebe.
In einem solchen Falle wäre dann auch zu überlegen, ob hierzu als Antrieb/Mitnahmeprofil statt eines Schlitzes ein Innensechskant zur Werkzeugaufnahme besser geeignet ist.
Gruß
Lurchi
Re: What about the 37232 S locking latch? / Was ist mit der 37232 S-Verschlussriegel?
Meine 3D-Designs für fischertechnik: www.printables.com/social/202816-juh www.thingiverse.com/juh