Microsoft Robotic Deplover Studio Problem

Alles rund um TX(T) und RoboPro, mit ft-Hard- und Software
Computing using original ft hard- and software
Forumsregeln
Bitte beachte die Forumsregeln!
Antworten
Karim54321
Beiträge: 22
Registriert: 07 Nov 2010, 15:37
Wohnort: Solingen,NRW

Microsoft Robotic Deplover Studio Problem

Beitrag von Karim54321 » 26 Nov 2010, 19:25

Hallo,
ich finde bei Microsoft Robotic Deplover Studio Die Ft ,,buttons´´ nicht.

Wie kann das seien :?:

Bitte helft mir...
Fischertechnik ist cool :-)

vleeuwen
Beiträge: 1557
Registriert: 31 Okt 2010, 22:23
Wohnort: Enschede (NL)
Kontaktdaten:

Re: Microsoft Robotic Deplover Studio Problem

Beitrag von vleeuwen » 26 Nov 2010, 23:28

Welcome to the world of MS-RDS.
First of all, all the official Microsoft documentation about MS-RDS is only available in English.
For the moment all the additional documentation about the Ft16Servcie and FtTxService is also done in English.

There exist no FT-buttons in MS-RDS.
In MS-RDS VPL you are working with services.
An instance of a service is called an activity.
Instead of the work flow/data flow that is in use by RoboPro, MS-RDS is message flow based.
A more natural way of resolving Robotic related problems.
This message flow oriented programming will give you the ability to work on a high abstract level and produce compact solutions.

The old original FT-service has been removed from the MS-RDS R3.
This original FT-service had a very limited functionality and was also full of design errors.

For more details, see the MS-RDS pages of fischertechnik. There you also will find information about replacements for the FT services.

Karim54321
Beiträge: 22
Registriert: 07 Nov 2010, 15:37
Wohnort: Solingen,NRW

Re: Microsoft Robotic Deplover Studio Problem

Beitrag von Karim54321 » 27 Nov 2010, 07:16

Übersetzung


Herzlich willkommen in die Welt der MS-RDS.FIRST von allen ist die ganze offizielle Dokumentation von Microsoft über die MS-RDS nur auf Englisch verfügbar. Im Augenblick wird die ganze zusätzliche Dokumentation über den Ft16Servcie und FtTxService auch auf Englisch getan. Bestehen Sie dort keine FT-Knöpfe in MS-RDS.In MS-RDS VPL Sie arbeiten mit Dienstleistungen. Ein Beispiel eines Dienstes wird eine Tätigkeit genannt. Statt des Arbeitsflusses des Flusses/Daten, der im Gebrauch durch RoboPro ist, ist MS-RDS beruhender Nachrichtenfluss. Eine natürlichere Weise, Robotic aufzulösen, verband Probleme. Dieser Nachrichtenfluss orientierte die Programmierung wird Ihnen die Arbeitsfähigkeit auf einem hoch abstrakten Niveau geben und Kompaktlösungen erzeugen. Der alte ursprüngliche FT-Dienst ist von der MS-RDS R3 entfernt worden. Dieser ursprüngliche FT-Dienst hatte eine sehr beschränkte Funktionalität und war auch mit Designfehlern voll. Für mehr Details, sieh die Seiten der MS-RDS von fischertechnik. Dort werden Sie auch Information über den Ersatz für die FT Dienstleistungen finden.
Fischertechnik ist cool :-)

Antworten