You have right, in these 2 files you can change the address of the USB and the WLAN access point.
But you need to have root access for changing them.
www,xxx,yyy,zzz
The
www.xxx.yyy needs to be in the range of
private networks.
If you change
the netmask, you can also change the zzz.
For example 192.186.7.2, 192.186.7.4, 192.186.7.5 So TXT's are part of the same sub network.
For broadcast address, see
But be careful, errors in these two file can lead to inaccessibility of for your TXT.
Some knowledge of netwerk addresses and DHCP could be recommendable.
In that case it could be possible that you will to reinstall the firmware.
What I am looking for is where the BT ip-address can be changed?
The two original files from the TXT.
Code: Alles auswählen
#
# Sample configuration file for ISC dhcpd for Debian
#
# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
#
# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
default-lease-time 600;
max-lease-time 7200;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
# log-facility local7;
subnet 192.168.7.0 netmask 255.255.255.252 {
range 192.168.7.1 192.168.7.1;
}
subnet 192.168.8.0 netmask 255.255.255.0 {
range 192.168.8.100 192.168.8.110;
}
subnet 192.168.9.0 netmask 255.255.255.0 {
range 192.168.9.100 192.168.9.110;
}
Code: Alles auswählen
# Configure Loopback
auto lo
auto usb0
auto eth0
iface lo inet loopback
iface eth0 inet dhcp
iface usb0 inet static
address 192.168.7.2
broadcast 192.168.7.3
netmask 255.255.255.252
iface wlan1 inet static
address 192.168.8.2
broadcast 192.168.8.255
netmask 255.255.255.0
=========================google translate====================
Sie haben Recht, in diesen 2 Dateien können Sie die Adresse des USB- und des WLAN-Zugangspunkts ändern.
Sie müssen jedoch über Root-Zugriff verfügen.
www, xxx, yyy, zzz
Die
www.xxx.yyy muss sich im Bereich privater Netzwerke befinden.
Wenn Sie die Netzmaske ändern, können Sie auch die zzz ändern.
Zum Beispiel 192.186.7.2, 192.186.7.3, 192.186.7.4,
Aber seien Sie vorsichtig, Fehler in dieser Datei können dazu führen, dass Ihr TXT nicht mehr erreichbar ist.
In diesem Fall können Sie möglicherweise die Firmware neu installieren.
Was ich suche, ist, wo die BT-IP-Adresse geändert werden kann?