Electro-modules from 60x60mm boxes
Verfasst: 07 Jan 2022, 21:19
Dear ftc members,
I picked up on my 30 year neglected FT hobby, having recently retired. A few years ago I also started 3-D printing and my main interest is in applying this with FT electronics and (computer) control, whether it is silberlinge, the old (universal/intelligent/Robo) interfaces or the newer sets and including the non-FT arduino, R-PI and FTduino products. This forum has been a great help and I am very grateful for being able to access multiple decades of collective experience and wisdom.
One of the things I wanted to do is create electro-modules, using the 60x60mm boxes and turning them into standardised digital measurement units for voltage/current/temperature/counts as well as build thermostats, timers and (bi-stable) relays, simply because I like a modular approach and don't want to do everything with computer controllers. I found an initial panel design on Thingiverse and remixed this to generate a variety of panels for the different kind of modules. Photo's, STL files and SCAD files are now available:
https://www.thingiverse.com/thing:5188458
Also an article has been published in the 2021-2 issue of the Dutch fischertechnik club magazine, which describes the approach and modules in more detail. Below a few photo's as illustration.
Best regards, Jeroen
PS: I can read and speak German pretty well but have opted to write in English as my German writing skills are below par...
Google translate:
Liebe ftc-Mitglieder,
Ich habe mein 30 Jahre lang vernachlässigtes FT-Hobby wieder aufgenommen, nachdem ich kürzlich in den Ruhestand getreten bin. Vor ein paar Jahren habe ich auch mit dem 3-D-Druck begonnen und mein Hauptinteresse gilt der Anwendung mit FT-Elektronik und (Computer-) Steuerung, egal ob Silberlinge, die alten (universellen/intelligenten/Robo-)Schnittstellen oder die neueren Sets und einschließlich der Nicht-FT-Arduino-, R-PI- und FTduino-Produkte. Dieses Forum war eine große Hilfe und ich bin sehr dankbar, dass ich auf mehrere Jahrzehnte kollektiver Erfahrung und Weisheit zugreifen kann.
Eines der Dinge, die ich tun wollte, war, Elektromodule zu erstellen, indem ich die 60x60-mm-Boxen verwendete und sie in standardisierte digitale Messeinheiten für Spannung/Strom/Temperatur/Zählwerte umwandelte, sowie einfach Thermostate, Timer und (bistabile) Relais zu bauen weil ich einen modularen Ansatz mag und nicht alles mit Computersteuerungen machen möchte. Ich habe ein erstes Panel-Design auf Thingiverse gefunden und dieses neu gemischt, um eine Vielzahl von Panels für die verschiedenen Arten von Modulen zu generieren. Fotos, STL-Dateien und SCAD-Dateien sind jetzt verfügbar:
https://www.thingiverse.com/thing:5188458
Außerdem ist in der Ausgabe 2021-2 des niederländischen fischertechnik club Magazins ein Artikel erschienen, der den Ansatz und die Module näher beschreibt. Unten ein paar Fotos als Illustration.
Mit freundlichen Grüßen Jeroen
I picked up on my 30 year neglected FT hobby, having recently retired. A few years ago I also started 3-D printing and my main interest is in applying this with FT electronics and (computer) control, whether it is silberlinge, the old (universal/intelligent/Robo) interfaces or the newer sets and including the non-FT arduino, R-PI and FTduino products. This forum has been a great help and I am very grateful for being able to access multiple decades of collective experience and wisdom.
One of the things I wanted to do is create electro-modules, using the 60x60mm boxes and turning them into standardised digital measurement units for voltage/current/temperature/counts as well as build thermostats, timers and (bi-stable) relays, simply because I like a modular approach and don't want to do everything with computer controllers. I found an initial panel design on Thingiverse and remixed this to generate a variety of panels for the different kind of modules. Photo's, STL files and SCAD files are now available:
https://www.thingiverse.com/thing:5188458
Also an article has been published in the 2021-2 issue of the Dutch fischertechnik club magazine, which describes the approach and modules in more detail. Below a few photo's as illustration.
Best regards, Jeroen
PS: I can read and speak German pretty well but have opted to write in English as my German writing skills are below par...
Google translate:
Liebe ftc-Mitglieder,
Ich habe mein 30 Jahre lang vernachlässigtes FT-Hobby wieder aufgenommen, nachdem ich kürzlich in den Ruhestand getreten bin. Vor ein paar Jahren habe ich auch mit dem 3-D-Druck begonnen und mein Hauptinteresse gilt der Anwendung mit FT-Elektronik und (Computer-) Steuerung, egal ob Silberlinge, die alten (universellen/intelligenten/Robo-)Schnittstellen oder die neueren Sets und einschließlich der Nicht-FT-Arduino-, R-PI- und FTduino-Produkte. Dieses Forum war eine große Hilfe und ich bin sehr dankbar, dass ich auf mehrere Jahrzehnte kollektiver Erfahrung und Weisheit zugreifen kann.
Eines der Dinge, die ich tun wollte, war, Elektromodule zu erstellen, indem ich die 60x60-mm-Boxen verwendete und sie in standardisierte digitale Messeinheiten für Spannung/Strom/Temperatur/Zählwerte umwandelte, sowie einfach Thermostate, Timer und (bistabile) Relais zu bauen weil ich einen modularen Ansatz mag und nicht alles mit Computersteuerungen machen möchte. Ich habe ein erstes Panel-Design auf Thingiverse gefunden und dieses neu gemischt, um eine Vielzahl von Panels für die verschiedenen Arten von Modulen zu generieren. Fotos, STL-Dateien und SCAD-Dateien sind jetzt verfügbar:
https://www.thingiverse.com/thing:5188458
Außerdem ist in der Ausgabe 2021-2 des niederländischen fischertechnik club Magazins ein Artikel erschienen, der den Ansatz und die Module näher beschreibt. Unten ein paar Fotos als Illustration.
Mit freundlichen Grüßen Jeroen