Push button housing.

Vorstellung von 3D-Druck-Teilen, Fragen zu 3D-Druckern, usw.
Discussion of 3D printed parts, Questions and answers on 3D printers and printing, etc.

Moderator: Jan3D

Forumsregeln
Bitte beachte die Forumsregeln!
Antworten
fotoopa
Beiträge: 223
Registriert: 05 Okt 2017, 11:44
Wohnort: Belgie
Kontaktdaten:

Push button housing.

Beitrag von fotoopa » 25 Mär 2020, 14:06

Push button housing. Connection of the make contact through the two extreme wires. Suitable for Fischertechniek building blocks.

Bild
Flickr picture:
https://www.flickr.com/photos/fotoopa_hs/49697374982

Thingiverse files:
https://www.thingiverse.com/thing:4240737

Parts on Web:

RobotDyn Drukknop module - Groen
https://www.tinytronics.nl/shop/nl/ardu ... dule-groen
RobotDyn Drukknop module - Rood
https://www.tinytronics.nl/shop/nl/ardu ... odule-rood
3 Pins header Female
https://www.tinytronics.nl/shop/nl/conn ... der-female

These push buttons are very robust and cheap. Connecting the 2 outer wires gives you a make contact. Works perfectly on the TXT-Controller. Especially for the children this pushbutton is very handy. The cover clicks on the housing. Small PCB can be fixed with 2 or 4 screws. The bottom side contains the standard FT slots.

Frans

Benutzeravatar
PHabermehl
Moderator
Beiträge: 1801
Registriert: 20 Dez 2014, 22:59
Wohnort: Bad Hersfeld

Re: Push button housing.

Beitrag von PHabermehl » 25 Mär 2020, 14:38

Hello Frans,

My first thought, even before reading, was:"Great for the kids!"

Good work and thanks for sharing.

Peter
Moderative Beiträge sind explizit gekennzeichnet!

Antworten