Hier darf über ALLES gequatscht werden, also Katzenfotos, Wetter in Ostwestfalen,
warme-Würstchen-Wünsche für Conventions und so weiter, solange gängige
Umgangsformen gewahrt werden.
-
Paxall
- Beiträge: 22
- Registriert: 10 Feb 2024, 12:33
Beitrag
von Paxall » 29 Feb 2024, 10:02
Hi Guys,
A Very short story!
Making something with my ft collection, then hit a snag, the chain using two cogs was too tight to one of the walls constructed for my small project!
I grumbled about the chain issue! Where my wife said to me, it's not going to be perfect, It's a toy!!!!
cheers
Paul
-
jmn
- Beiträge: 172
- Registriert: 14 Nov 2010, 20:07
- Wohnort: Capelle aan den IJssel
Beitrag
von jmn » 01 Mär 2024, 12:53
Don't know exactly what you are trying to share, but every technical issue comes with a solution!
-
Paxall
- Beiträge: 22
- Registriert: 10 Feb 2024, 12:33
Beitrag
von Paxall » 02 Mär 2024, 09:28
Hiya,
Its was me saying like i'm annoyed with my wife's response of the word "toy"!
Hope that clarifies it, maybe it shouldn't be on hear I dont know!
cheers
Paul
-
fishfriend
- Beiträge: 2208
- Registriert: 26 Nov 2010, 11:45
Beitrag
von fishfriend » 02 Mär 2024, 09:44
Hallo...
Toy in one hand and in the other hand, the best technik in the world.

Mit freundlichen Grüßen
Holger
ft Riesenräder PDF: ftcommunity.de/knowhow/bauanleitungen
TX-Light: Arduino und ftduino mit RoboPro
-
elektrofuzzis
- Beiträge: 220
- Registriert: 25 Jun 2016, 09:40
Beitrag
von elektrofuzzis » 02 Mär 2024, 10:36
Hi Paul,
it's easy to explain your wife, ft isn't a toy at all. Just show her the costs...
Best,
Stefan
-
jmn
- Beiträge: 172
- Registriert: 14 Nov 2010, 20:07
- Wohnort: Capelle aan den IJssel
Beitrag
von jmn » 02 Mär 2024, 22:43
Well, your wife is right, can't blaim her. It's just a toy. Now for you to show her is it is more than just a toy.
My wife thought the same in the beginning until she came to a club meeting and saw the jawdropping kids walking by and realised it was more than a toy!
-
Paxall
- Beiträge: 22
- Registriert: 10 Feb 2024, 12:33
Beitrag
von Paxall » 03 Mär 2024, 08:49
Hi Guys,
Thanks for all your replies
Are there any shows planned this year, I live in Germany!
Cheers
Paul
-
elektrofuzzis
- Beiträge: 220
- Registriert: 25 Jun 2016, 09:40
Beitrag
von elektrofuzzis » 03 Mär 2024, 12:29
Hi Paul,
just check
https://ftcommunity.de/fans/veranstaltungen/.
In November there will be the sűd:convention in Sinsheim as well.
The Fördertechnik Museum in Sinsheim is a good trip the whole year. They have a lot of cool ft models in the first floor.
And there is the fischertechnik cable car in the basement (if you count the parts, it's the biggest ft model in the world. Measuring the length, it's just nr. 2).
In the beginning of June, the cable car will be at the cable car world in Essen.
Best,
Stefan
-
Paxall
- Beiträge: 22
- Registriert: 10 Feb 2024, 12:33
Beitrag
von Paxall » 04 Mär 2024, 04:12
Hi Stefan,
Thank you.
cheers
Paul
-
ThanksForTheFish
- Beiträge: 612
- Registriert: 03 Nov 2010, 21:00
- Wohnort: 30900 Wedemark
Beitrag
von ThanksForTheFish » 04 Mär 2024, 23:02
Hi Paul,
on April 20th the Nordconvention will take place in 30900 Wedemark / Mellendorf.
That's near Hanover.
If you are interested in visiting us or participating as an exhibitor - no problem.
The entrance fee is 0 €
kind regards, Ralf
Leider wird es im Jahr 2025 keine Nordconvention in Mellendorf geben!
-
Paxall
- Beiträge: 22
- Registriert: 10 Feb 2024, 12:33
Beitrag
von Paxall » 12 Mär 2024, 17:58
Hey Ralf,
Do you know If the place is Disabled freindly, as I'm bound to a wheelchair?
cheers
Paul