DIY LEDs

Ersatz- und Fremdteile, Modifikationen, etc.
Special Hints - Spare- & foreign parts, Modifications, etc.

Moderator: Jan3D

Forumsregeln
Bitte beachte die Forumsregeln!
Antworten
Benutzeravatar
rubem
Beiträge: 240
Registriert: 10 Feb 2014, 17:45
Wohnort: Porto Alegre, RS, Brasil

DIY LEDs

Beitrag von rubem » 25 Jan 2021, 23:14

Hi,

I like to match the LED to the hub cap color, so I have various self-made color LEDs.

First row: original ft yellowish white LED
Second row: blue, yellow, high luminosity white, red.
Third row: two true green LEDs made from RGB LEDs taken from an LED strip.

All LEDs have 470-1k ohm series resistors, some being SMDs as shown in the second picture. The bottom row ones were especially difficult to solder because they are extremely heat-sensitive, and I lost several.

But in the end I became satisfied with the results!

Various LEDs.jpg
Various LEDs.jpg (76.62 KiB) 1281 mal betrachtet
LED and SMD resistor before assembly
LED and SMD resistor before assembly
Red LED.jpg (88.18 KiB) 1281 mal betrachtet

Benutzeravatar
steffalk
ft:pedia-Herausgeber
Beiträge: 1792
Registriert: 01 Nov 2010, 16:41
Wohnort: Karlsruhe
Kontaktdaten:

Re: DIY LEDs

Beitrag von steffalk » 26 Jan 2021, 11:38

Wow - great!

Best Regards,
Stefan

Antworten