Extra parts for the Fischertechnik marble track

Ersatz- und Fremdteile, Modifikationen, etc.
Special Hints - Spare- & foreign parts, Modifications, etc.

Moderator: Jan3D

Forumsregeln
Bitte beachte die Forumsregeln!
Antworten
fotoopa
Beiträge: 312
Registriert: 05 Okt 2017, 11:44
Wohnort: Belgie
Kontaktdaten:

Extra parts for the Fischertechnik marble track

Beitrag von fotoopa » 03 Feb 2019, 16:07

Extra parts for the Fischertechnik marble track. Many extra parts are printed in 3D. Especially the magnet holder for the chain is useful. There is a special holder made for the start of the ball track on the chain. This holder has the right inclinations, shape and is provided for a braking zone for the balls. Connecting to the fex rails is therefore very easy. There is also an intermediate plate 45x45x5mm to make high supports. Also 2 types of blocks with sloping edges to keep long chains in the right place. Furthermore a flex rail flex_rad180_D45 was missing in my previous posting.

Bild

Bild

HD pictures:
https://www.flickr.com/photos/fotoopa_hs/33094950358
https://www.flickr.com/photos/fotoopa_hs/33094944008
https://www.flickr.com/photos/fotoopa_hs/32029322287
https://www.flickr.com/photos/fotoopa_hs/46918473102
https://www.flickr.com/photos/fotoopa_hs/40005831513
https://www.flickr.com/photos/fotoopa_hs/40005831983
https://www.flickr.com/photos/fotoopa_hs/46246070344
https://www.flickr.com/photos/fotoopa_hs/40005832493

Link to Thingiverse files:
https://www.thingiverse.com/thing:3401461

I made a small video with an example:
https://youtu.be/pmIitF_yc5s

Frans.

Benutzeravatar
PHabermehl
Beiträge: 2429
Registriert: 20 Dez 2014, 22:59
Wohnort: Bad Hersfeld

Re: Extra parts for the Fischertechnik marble track

Beitrag von PHabermehl » 03 Feb 2019, 18:51

Looks like Frans works 24 hours a day and additionally at least 8 hours per night....
How many printers do you run in parallel?

Btw, great job again!

Kind regards
Peter
https://www.MINTronics.de -- der ftDuino & TX-Pi Shop!

viele Grüße
Peter

fotoopa
Beiträge: 312
Registriert: 05 Okt 2017, 11:44
Wohnort: Belgie
Kontaktdaten:

Re: Extra parts for the Fischertechnik marble track

Beitrag von fotoopa » 03 Feb 2019, 19:23

PHabermehl hat geschrieben:Looks like Frans works 24 hours a day and additionally at least 8 hours per night....
How many printers do you run in parallel?
Not really... it's about 10 hours a day and 5 hours at night. I sleep very bad so I develop a lot of new projects during the night.
My 3D printer has had to work about 8 hours a day in the last 3 weeks. Next week there will be a short stop, one of the grandchildren (14 months old) will be on holiday for 10 days with us.. then I close my workroom.

I just recorded a new small video of something very simple. I try to edit it and put it online.

Frans.

Antworten