Die Suche ergab 1537 Treffer

von vleeuwen
18 Nov 2022, 09:19
Forum: Robo Pro / Computing / Software
Thema: TXT from firmware 4.1.x to 4.7.0
Antworten: 13
Zugriffe: 2342

TXT from firmware 4.1.x to 4.7.0

Moin Moin. ich bin seit längerer Zeit wieder voll bei Fischer und vor allem habe ich jetzt Zeit dafür. Bei den TXT Controllern habe ich Probleme. Einer hat die 4.1.6.0, der andere die 4.2.4.0. Beide lassen sich nicht auf die 4.7.0.0 aktualisieren. Wie kann ich es anstellen, das beide aktuell vom Sy...
von vleeuwen
17 Nov 2022, 23:35
Forum: Robo Pro / Computing / Software
Thema: TXT RoboPro Update
Antworten: 1
Zugriffe: 548

Re: TXT RoboPro Update

@fishfriend
See the release notes for 4.7.0:
https://github.com/fischertechnik/FT-TXT/releases
von vleeuwen
14 Nov 2022, 15:42
Forum: Robo Pro / Computing / Software
Thema: TXT - Initialisierung des Gestensensors im Onlinemodus?
Antworten: 20
Zugriffe: 2374

Re: TXT - Initialisierung des Gestensensors im Onlinemodus?

@Holger Here you will find a lot of information about programming for the TXT: https://github.com/fischertechnik/txt_demo_ROBOPro_SLI https://github.com/fischertechnik/txt_demo_c_online https://github.com/fischertechnik/txt_demo_c_download https://github.com/fischertechnik/txt_training_factory But a...
von vleeuwen
14 Nov 2022, 09:22
Forum: Robo Pro / Computing / Software
Thema: TXT - Initialisierung des Gestensensors im Onlinemodus?
Antworten: 20
Zugriffe: 2374

Re: TXT - Initialisierung des Gestensensors im Onlinemodus?

As far as I understood the TXT with the fischertechnik firmware. The communication in the online mode is based on the principle of the Transfer Area with the associated refresh rate, in addition there are at least two extra Berkely sockets (IP sockets) in use for video and I2C? (is not documented). ...
von vleeuwen
12 Nov 2022, 18:37
Forum: Robo Pro / Computing / Software
Thema: TXT - Initialisierung des Gestensensors im Onlinemodus?
Antworten: 20
Zugriffe: 2374

Re: TXT - Initialisierung des Gestensensors im Onlinemodus?

Maybe the 5 sec online SLI bug (also for I2C valide because these I2C RoboPro elements are SLI functions).
See also: viewtopic.php?f=8&t=7645&p=59450#p59450
von vleeuwen
03 Nov 2022, 18:54
Forum: Robo Pro / Computing / Software
Thema: MQTT enabled SLI function for the TXT Controller
Antworten: 2
Zugriffe: 959

Re: MQTT enabled SLI function for the TXT Controller

Be aware of the online 5sec SLI bug: I published this bug several years ago. The RoboPro runtime terminates an SLI process if it is idle for 5 seconds or more. A " SLI dummy" KeepAwake function call operation in RoboPro that is repeated within every 5 sec is sufficient as a work around. See also: ht...
von vleeuwen
03 Nov 2022, 14:43
Forum: fischertechnik allgemein
Thema: Robotics Smarttech RX
Antworten: 39
Zugriffe: 6833

Re: Robotics Smarttech RX

@Björn About 5sec SLI bug: I published this bug several years ago. The 5 sec bug is the same as the one with the RoboPro SLI elements. The RoboPro runtime terminates an SLI process if it is idle for 5 seconds or more. The two I2C ROboPro elements on the TXT are implemented as SLI elements. A dummy I...
von vleeuwen
01 Nov 2022, 21:45
Forum: Robo Pro / Computing / Software
Thema: Lego to discontinue Mindstorms robot line after a 24-year run
Antworten: 16
Zugriffe: 2376

Re: Lego to discontinue Mindstorms robot line after a 24-year run

Rei's comment also directly relates to the TXT4.0 and the developments in the software. That's why it fits well in this section. Especially when I look at some other topics. Rei started in English, in the reactions that aspect is sometimes missing. The silence around the TXT4.0 firmware and imperfec...
von vleeuwen
31 Okt 2022, 09:44
Forum: Robo Pro / Computing / Software
Thema: Lego to discontinue Mindstorms robot line after a 24-year run
Antworten: 16
Zugriffe: 2376

Re: Lego to discontinue Mindstorms robot line after a 24-year run

The original Robo Pro brought robot programming at a higher abstraction level closer to the end user and therefore also the young people. RoboPro coding, a text generator for a small subset of Python, brings the elementary aspects of simple imperative programming closer to the end user. RoboPro beau...
von vleeuwen
28 Okt 2022, 17:10
Forum: Robo Pro / Computing / Software
Thema: Lego to discontinue Mindstorms robot line after a 24-year run
Antworten: 16
Zugriffe: 2376

Re: Lego to discontinue Mindstorms robot line after a 24-year run

Hi Rei I share your hopes for a good continuation of the TXT 4.0 project. It's been pretty quiet since the release of TXT 4.0 firmware 3.1.0 last October. The industrial robots have disappeared from the FT range. With RoboPro coding, which only delivers a subset of Python, programming more complex r...
von vleeuwen
20 Okt 2022, 00:04
Forum: Robo Pro / Computing / Software
Thema: ftrobopy und ROBOPro auf dem TXT 4.0
Antworten: 49
Zugriffe: 10992

Re: ftrobopy und ROBOPro auf dem TXT 4.0

The IP connection over the internet as well as USB and Bluetooth is also quite unstable in other cases. I reported a year ago that developing remote Python with MS-Visual Studio code is unpleasant because of that instability. After a year there is still no update of the firmware version. ===========...
von vleeuwen
11 Okt 2022, 19:19
Forum: Modellideen & -vorstellung
Thema: Impulskompensation
Antworten: 6
Zugriffe: 1664

Re: Impulskompensation

Control engineering problem: Step response, PID control, stability criterion, mass inertia. Mechanically somewhat flexible coupling between the stepper motor and the mass to be driven; which connection acts as a damper. The dynamic mechanical properties of this connection are important as they form ...
von vleeuwen
08 Okt 2022, 22:21
Forum: fischertechnik allgemein
Thema: compilation video & photos Sinsheim 2022
Antworten: 6
Zugriffe: 1306

Re: compilation video & photos Sinsheim 2022

Ruud, thanks for the photos and video.
I was not able to go.
I had other obligations: children 2 to 12 year showing fischertechnik.
von vleeuwen
06 Okt 2022, 20:18
Forum: Robo Pro / Computing / Software
Thema: Problem Profi computing
Antworten: 19
Zugriffe: 5789

Re: Problem Profi computing

viewtopic.php?f=8&t=5025&p=36698&hilit=win98#p36698

Windows XP has a higher level of security, there is no direct acces to LPT allowed; it needs dedicated drivers to access the LPT ports.
von vleeuwen
06 Okt 2022, 16:40
Forum: Robo Pro / Computing / Software
Thema: Problem Profi computing
Antworten: 19
Zugriffe: 5789

Re: Problem Profi computing

@schröttel
You need Windows98, Windows XP blocks a part of the LPT port.
von vleeuwen
06 Okt 2022, 16:34
Forum: Robo Pro / Computing / Software
Thema: ROBO Pro für den ftDuino
Antworten: 19
Zugriffe: 4015

Re: ROBO Pro ist tot - lang lebe ROBO Pro: Jetzt auch für den ftDuino

Was tatsächlich passiert, ist eine Online-TA-Kommunikation. Wahrscheinlich mit Ausnahme der C-Funktionsaufrufe. Natürlich ist es toll, dass uns das gelungen ist, das zu entwickeln, und davor habe ich auf jeden Fall großen Respekt. Neben der visuellen Programmierfunktion besteht ein weiterer wesentli...
von vleeuwen
06 Okt 2022, 09:01
Forum: Robo Pro / Computing / Software
Thema: ROBO Pro für den ftDuino
Antworten: 19
Zugriffe: 4015

Re: ROBO Pro ist tot - lang lebe ROBO Pro: Jetzt auch für den ftDuino

Wenn ich das richtig verstehe, ist das die RoboPro-Version für den TX-C, ist das richtig? Sind alle Teile dieser Version von Robopro funktionsfähig oder handelt es sich um eine Teilmenge? Schließt dies die Kommunikation zwischen TX-Cs ein? Wird sich RoboPro weiterentwickeln oder kommt es zum Stillst...