fischertechnik community forum

Ok, I knew something was different from what I remembered. My directory is Roboint_Compiler-1-01 and missing "interpreterV1.01.rom". I unzipped this directory straight from what I still had in storage...

Ok, that was an oops. I was convinced I had... it has built successfully now, but I find another problem. I can't run any .hex file unless I have interpreter.hex and the windows version of ftupload(er). I've searched for both (for ftupload(er) also inside the ROBOPro directory) and unable to find th...

I realize this may not an easy one...but after talking with Thomas Kaiser at the Dreieich convention, I'm taking a look into BASIC again (I know it's very old by now) and I'm running into a problem. His advise was to use windows version of ftuploader and wine. Using Ubuntu 16.04 (but I assume that d...

Glad to hear. You're welcome.

hvn

Hi all,

I've uploaded all my pictures of conventions from 2007 until now to https://www.flickr.com/photos/89022424@N07/albums.

Hope you enjoy.

hvn

Hi,

You're very welcome. Yes, many models and a huge diversity of models as well.

Regards

Hi all,

I've created 2 compilation videos recorded in full-HD of the convention in Dreieich.

Part 1: https://youtu.be/zzZqBeieyio (30 minutes)
Part 2: https://youtu.be/tT4_Arpfpdo (~37 minutes)

Pictures: https://www.flickr.com/photos/89022424@ ... 5519136702

I hope you enjoy.

hvn

I know those are 2 different things, and I probably didn't express it entirely correct. When I login, 2 events happen. An ssh connection is set up and a login is performed. When the ssh connection is set up now, first time after power-on, I have to confirm the connection on the controller. With the ...

Previously, when I used the older cfw and after setting the password, I didn't have to OK each first time after power-on. So something has changed....

Another detail I noticed: although the password is set for the ftc user, after trying to login I had 3 occasions (on 2 different computers) where I had to confirm the ssh connection on the controller, despite the host verification being ok. A 2nd attempt on the same computer goes without confirmatio...

Hi Torsten, Thank you, I'll change it. On the cfw wireless: I experienced something strange. When I started the controller I got the message "ssh: connect to host 10.0.0.134 port 22: No route to host". Then I checked the WLAN in the menu and found it had received a DHCP address: 10.0.0.202. Pressing...

I had time to look at it again and the card still won't work properly. So it's time to replace it, which raises the question what the maximum capacity uSD card is the controller can handle (if there is a maximum). hvn According to https://github.com/ftCommunity/ftcommunity-TXT/wiki/%5BEN%5D-Configur...

I tried the following: use dd to make an image of the working uSD card from my other TXT controller. Then copy (dd) the image onto the target uSD card. Both cards are 8GB and worked perfectly. During the dd action, I surprisingly get the the message 'no space left on device". Taking out the card, it...

For me it went from bad to worse. I followed the instructions and formatted the uSD card into FAT32, then copied the 3 files onto the card. Next: insert the card into the TXT and it boots into the default firmware, NOT the cfw. ?!! BTW, what MasterOfGizmo tells, that didn't work for me. I've tried t...

So actually, I should do a new cfw install.

On the default (ROBOPro) firmware, the WLAN is working. The DHCP server connects fine on 192.168.8.2.
Note: on the cfw, I use my own 10.0.0.x IP, so no DHCP on the TXT controller.

Ok, from top down: after boot I get a System icon. After pressing it, I get several icons, such as Network and WLAN. When I press WLAN, I get on top of screen 'WLAN', under that an empty bar/button. Pressing it doesn't do anything. Under that 'Encryption', button showing "OPEN', pressing it I can se...

Hi,

I've successfully upgraded the cfw to 0.9.3 via the online method but now the WLAN list doesn't show. Pressing the bar doesn't help. The Encryption and Key work fine, the Network data was preserved. I've tried to ssh to the controller, but I get the message No route to host. Any solution?

hvn

Dear ft-team, Because my written German isn't very good, I write in English. This TXT controller is already a replacement by ft, but this one also has distinct problems. - After power-off, the date/time is set back to 2000-01-01, 0:00. The battery-cell has been replaced, but this didn't solve the pr...

Hi,

I've made a compilation video of the convention in Breda: https://youtu.be/Vb0m7lY28Os

hvn