Die Suche ergab 1549 Treffer
- 28 Apr 2024, 19:25
- Forum: Robo Pro / Computing / Software
- Thema: PFC8574 IO Expander mit Robo Pro Coding
- Antworten: 5
- Zugriffe: 211
Re: PFC8574 IO Expander mit Robo Pro Coding
I took a look into this data sheet STM32MP157C MPU with Arm Dual Cortex-A7 650 MHz, Arm Cortex-M4 real-time coprocessor, 3D GPU, This one is offering an Optional hardware clock stretching Maybe somebody knows the exact type of the chip set in the TXT4.0. However the questions stays: does the OS supp...
- 28 Apr 2024, 17:55
- Forum: Robo Pro / Computing / Software
- Thema: PFC8574 IO Expander mit Robo Pro Coding
- Antworten: 5
- Zugriffe: 211
Re: PFC8574 IO Expander mit Robo Pro Coding
I use a PN532 in combination with an FT232H (USB to I2C+GPIO) or with a RaspberryPi 4 (hardware bug older versions), both have no clock stretching, and I have experienced that clock stretching is used during read/write operations of a chip (I2C bus 400kHz) . On the ReaspberryPi5 the clock stretching...
- 27 Apr 2024, 19:04
- Forum: Robo Pro / Computing / Software
- Thema: PFC8574 IO Expander mit Robo Pro Coding
- Antworten: 5
- Zugriffe: 211
Re: PFC8574 IO Expander mit Robo Pro Coding
The problem with the NFC Reader PN532 is that it needs clock stretching. That can not be test with a simple test, you need a slave that holds down the clock. Does the TXT4.0 has implemented the I2C clock stretching protocol and what are the specifications? The TXT had problems with it. he TXT4.0 I2C...
- 27 Apr 2024, 17:56
- Forum: Robo Pro / Computing / Software
- Thema: Fabrik mit Mosquitto Server verbinden.
- Antworten: 5
- Zugriffe: 313
Re: Fabrik mit Mosquitto Server verbinden.
@vleeuwen: Ziel ist es aber nun von einem Dashboard auf mehrere Fabriken zugreifen zu können. Gibt es hier Ideen wie sich dies auch anders realisieren lässt? Meine Idee war jeweils eine Bridge von den Txt Brokern der fabriken zu einem zentralen Broker aufzubauen und dort mit node Red auf alle Fabri...
- 26 Apr 2024, 13:33
- Forum: Robo Pro / Computing / Software
- Thema: Fabrik mit Mosquitto Server verbinden.
- Antworten: 5
- Zugriffe: 313
Re: Fabrik mit Mosquitto Server verbinden.
When you run the MQTT broker locally (on you laptop, raspberry pi or TXT or TXT4.0 and also the node-red dashboard inside your local network, you don't need the bridge. The bridge needs to be used in case that you need cloud functionality. It is possible to connect more factories with one MQTT broke...
- 23 Apr 2024, 13:32
- Forum: Modellideen & -vorstellung
- Thema: Using lego devices with the TXT
- Antworten: 3
- Zugriffe: 315
Re: Using lego devices with the TXT
The lack of a rotary (quadrature) decoder functionality on the TXT4.0 (and the TXT and TX-C) is a loss. The Incremental decoder sometimes causes problems in various applications if there is loopback. However, if the mechanical transmission is blocking, for example with a worm transmission, an increm...
- 21 Apr 2024, 18:41
- Forum: Robo Pro / Computing / Software
- Thema: NFC-Reader Beispielsoftware
- Antworten: 20
- Zugriffe: 1429
Re: NFC-Reader Beispielsoftware
Does the TXT4.0 support a good implemented clock stretching? I can not find it in the specifications. Otherwise you need to use 2 Input pins reset=reset_pin, req=req_pin) # With I2C, we recommend connecting RSTPD_N (reset) to a digital pin for manual # harware reset reset_pin = DigitalInOut(board.D6...
- 21 Apr 2024, 12:50
- Forum: Robo Pro / Computing / Software
- Thema: FTP-Zugriff auf TXT 4.0
- Antworten: 3
- Zugriffe: 295
Re: FTP-Zugriff auf TXT 4.0
@phg-berlin
Reading carefully the user manual or data-sheet, always very important.
The setting part is always very importante too.
Reading carefully the user manual or data-sheet, always very important.
The setting part is always very importante too.
- 19 Apr 2024, 23:49
- Forum: Robo Pro / Computing / Software
- Thema: FTP-Zugriff auf TXT 4.0
- Antworten: 3
- Zugriffe: 295
Re: FTP-Zugriff auf TXT 4.0
With my TXT4.0, it works well.
In the settings menu | remote access (scroll settings!): the SSH needs to be activated (default=off).
See the on-line TXT4.0 user manual.
In the settings menu | remote access (scroll settings!): the SSH needs to be activated (default=off).
See the on-line TXT4.0 user manual.
- 13 Apr 2024, 20:49
- Forum: Robo Pro / Computing / Software
- Thema: NFC-Reader Beispielsoftware
- Antworten: 20
- Zugriffe: 1429
Re: NFC-Reader Beispielsoftware
That definitely sounds like a possible solution but it still seems a bit complicated. There must be a way to communicate with the NFC Reader via libraries that can be installed on the TXT itself, without using the SD memory workaround... FileZilla remote connection SSH SFTP connection. Putty voor r...
- 13 Apr 2024, 01:46
- Forum: Robo Pro / Computing / Software
- Thema: NFC-Reader Beispielsoftware
- Antworten: 20
- Zugriffe: 1429
Re: NFC-Reader Beispielsoftware
@NFC-Enjoyer I was using MS-Visual Studio code to develop and install Python (libraries with pip(3)) Software remotely on the TXT4.0. However the TXT 4.0 file oriented memory is to small for the VS code supporting files. I moved the VS code supporting file a SD memory card in the TXT4.0; see the MS-...
- 04 Apr 2024, 22:25
- Forum: Robo Pro / Computing / Software
- Thema: NFC-Reader Beispielsoftware
- Antworten: 20
- Zugriffe: 1429
Re: NFC-Reader Beispielsoftware
RoboPro coding => TXT4.0 Python Probably you need: to develop a driver in Python for the PN532 from adafruit_pn532.i2c import PN532_I2C import nfc import ndef A suggestion for an experiment with PN532: Be aware of the I2C clock stretching issues of the pn532, see the data sheet and adafruit If the I...
- 18 Mär 2024, 13:33
- Forum: Robo Pro / Computing / Software
- Thema: Messung der Stromaufnahme 9V Encodermotor
- Antworten: 17
- Zugriffe: 3077
Re: Messung der Stromaufnahme 9V Encodermotor
Be aware that the TXT I2C (SDA, SCL) is 3.3V and it is not 5V tolerant. There is no 3.3V power available at the extension connector. So you need to use a 9V to 3.3V regulator/converter/step down when you are using the TXT power supply for the INA219. The I2C interface of the TXT has been based on th...
- 23 Feb 2024, 18:45
- Forum: Robo Pro / Computing / Software
- Thema: TXT-Controller funktioniert nicht.
- Antworten: 11
- Zugriffe: 1194
Re: TXT-Controller funktioniert nicht.
@spät_Berufener
TXT4.0 controller = The new Python RoboPro coding
TXT-Controller in Betrieb zu nehmen
TXT-controller = The original RoboProin Robo Pro Coding habe ich das Modell konfiguriert,
TXT4.0 controller = The new Python RoboPro coding
- 15 Feb 2024, 13:44
- Forum: Plauderecke
- Thema: Controller TXT-3329
- Antworten: 6
- Zugriffe: 1465
Re: Controller TXT-3329
You have aTXT controller. 3329 is the unique identifier. This number will change every firmware update. You can use: RoboPro v4.7.0 Download for the .msi (includs the firmware update): https://github.com/fischertechnik/FT-TXT/releases/tag/v4.7.0 Or C++/C (online or off line mode), MS-Visual Studio a...
- 09 Feb 2024, 14:59
- Forum: Robo Pro / Computing / Software
- Thema: Suche Befehlsübersicht
- Antworten: 4
- Zugriffe: 564
Re: Suche Befehlsübersicht
The TXT has also knows also an element to extent the functionality with use define RoboPro elements, writen in C++, called: TXT Shared Library Interface (SLI) . See https://github.com/fischertechnik/txt_demo_ROBOPro_SLI The help inside RoboPro is also very good. Under https://github.com/fischertechn...
- 30 Jan 2024, 19:20
- Forum: Robo Pro / Computing / Software
- Thema: Fabrik 4.0 mittels MQTT mit eigenem Client verbinden
- Antworten: 7
- Zugriffe: 867
Re: Fabrik 4.0 mittels MQTT mit eigenem Client verbinden
Use the local network IP-addresses as define here . The router managed 192.168.10.xxx local network domain. If the .cloud extension has been removed, the MQTT brooker on 192.168.0.10 starts without the fischertechnik bridge. Your laptop MQTT client connect with the MQTT brooker on 192.168.0.10. You ...
- 28 Jan 2024, 17:05
- Forum: Robo Pro / Computing / Software
- Thema: Fabrik 4.0 mittels MQTT mit eigenem Client verbinden
- Antworten: 7
- Zugriffe: 867
Re: Fabrik 4.0 mittels MQTT mit eigenem Client verbinden
The C++ code is for the TXT. Your factory 4.0 is using TXT's. It is about "Industry 4.0" The code recompiles with MS-VS. RoboPro coding is for the TXT4.0. The new one is with TXT4.0 (https://www.fischertechnik.de/de-de/produkte/industrie-und-hochschulen/simulationsmodelle/567769-lernfabrik-4-0-9v-v-...
- 20 Jan 2024, 22:28
- Forum: Robo Pro / Computing / Software
- Thema: Robo Pro Coding Probleme mit der Eingabe "No module named 'lib.display' "
- Antworten: 6
- Zugriffe: 442
Re: Robo Pro Coding Probleme mit der Eingabe "No module named 'lib.display' "
Did you start with new project TXT4.0 with a template display or camera/display? What is the Python code (right pane)? It will looks like (labe=txt_label) from lib.controller import * from lib.display import * while True: display.set_attr("txt_label.text", str('abc')) tab display configuration (gene...
- 09 Jan 2024, 14:56
- Forum: Robo Pro / Computing / Software
- Thema: I2C-LCD-Display funktioniert am TXT nicht.
- Antworten: 8
- Zugriffe: 825
Re: I2C-LCD-Display funktioniert am TXT nicht.
See also: https://www.eeweb.com/level-shifting-te ... us-design/
Level Shift 5v has not been connected with a 5v power supply? The same for the Gnd.
I miss the termination resistors on both the 3.3V and 5V side.
Suggestion: Check the I2C signal shapes on the 5V side with an oscilloscope.
Level Shift 5v has not been connected with a 5v power supply? The same for the Gnd.
I miss the termination resistors on both the 3.3V and 5V side.
Suggestion: Check the I2C signal shapes on the 5V side with an oscilloscope.