Die Suche ergab 1537 Treffer

von vleeuwen
18 Mär 2024, 13:33
Forum: Robo Pro / Computing / Software
Thema: Messung der Stromaufnahme 9V Encodermotor
Antworten: 5
Zugriffe: 182

Re: Messung der Stromaufnahme 9V Encodermotor

Be aware that the TXT I2C (SDA, SCL) is 3.3V and it is not 5V tolerant. There is no 3.3V power available at the extension connector. So you need to use a 9V to 3.3V regulator/converter/step down when you are using the TXT power supply for the INA219. The I2C interface of the TXT has been based on th...
von vleeuwen
23 Feb 2024, 18:45
Forum: Robo Pro / Computing / Software
Thema: TXT-Controller funktioniert nicht.
Antworten: 8
Zugriffe: 337

Re: TXT-Controller funktioniert nicht.

@spät_Berufener
TXT-Controller in Betrieb zu nehmen
in Robo Pro Coding habe ich das Modell konfiguriert,
TXT-controller = The original RoboPro

TXT4.0 controller = The new Python RoboPro coding
von vleeuwen
15 Feb 2024, 13:44
Forum: Plauderecke
Thema: Controller TXT-3329
Antworten: 6
Zugriffe: 962

Re: Controller TXT-3329

You have aTXT controller. 3329 is the unique identifier. This number will change every firmware update. You can use: RoboPro v4.7.0 Download for the .msi (includs the firmware update): https://github.com/fischertechnik/FT-TXT/releases/tag/v4.7.0 Or C++/C (online or off line mode), MS-Visual Studio a...
von vleeuwen
09 Feb 2024, 14:59
Forum: Robo Pro / Computing / Software
Thema: Suche Befehlsübersicht
Antworten: 4
Zugriffe: 467

Re: Suche Befehlsübersicht

The TXT has also knows also an element to extent the functionality with use define RoboPro elements, writen in C++, called: TXT Shared Library Interface (SLI) . See https://github.com/fischertechnik/txt_demo_ROBOPro_SLI The help inside RoboPro is also very good. Under https://github.com/fischertechn...
von vleeuwen
30 Jan 2024, 19:20
Forum: Robo Pro / Computing / Software
Thema: Fabrik 4.0 mittels MQTT mit eigenem Client verbinden
Antworten: 7
Zugriffe: 731

Re: Fabrik 4.0 mittels MQTT mit eigenem Client verbinden

Use the local network IP-addresses as define here . The router managed 192.168.10.xxx local network domain. If the .cloud extension has been removed, the MQTT brooker on 192.168.0.10 starts without the fischertechnik bridge. Your laptop MQTT client connect with the MQTT brooker on 192.168.0.10. You ...
von vleeuwen
28 Jan 2024, 17:05
Forum: Robo Pro / Computing / Software
Thema: Fabrik 4.0 mittels MQTT mit eigenem Client verbinden
Antworten: 7
Zugriffe: 731

Re: Fabrik 4.0 mittels MQTT mit eigenem Client verbinden

The C++ code is for the TXT. Your factory 4.0 is using TXT's. It is about "Industry 4.0" The code recompiles with MS-VS. RoboPro coding is for the TXT4.0. The new one is with TXT4.0 (https://www.fischertechnik.de/de-de/produkte/industrie-und-hochschulen/simulationsmodelle/567769-lernfabrik-4-0-9v-v-...
von vleeuwen
20 Jan 2024, 22:28
Forum: Robo Pro / Computing / Software
Thema: Robo Pro Coding Probleme mit der Eingabe "No module named 'lib.display' "
Antworten: 6
Zugriffe: 345

Re: Robo Pro Coding Probleme mit der Eingabe "No module named 'lib.display' "

Did you start with new project TXT4.0 with a template display or camera/display? What is the Python code (right pane)? It will looks like (labe=txt_label) from lib.controller import * from lib.display import * while True: display.set_attr("txt_label.text", str('abc')) tab display configuration (gene...
von vleeuwen
09 Jan 2024, 14:56
Forum: Robo Pro / Computing / Software
Thema: I2C-LCD-Display funktioniert am TXT nicht.
Antworten: 8
Zugriffe: 675

Re: I2C-LCD-Display funktioniert am TXT nicht.

See also: https://www.eeweb.com/level-shifting-te ... us-design/
Level Shift 5v has not been connected with a 5v power supply? The same for the Gnd.
I miss the termination resistors on both the 3.3V and 5V side.
Suggestion: Check the I2C signal shapes on the 5V side with an oscilloscope.
von vleeuwen
24 Dez 2023, 23:50
Forum: Robo Pro / Computing / Software
Thema: Überblick verloren
Antworten: 26
Zugriffe: 1911

Re: Überblick verloren

About: 10-45-F8-BC-15-4C

Search results for "10-45-F8-BC-15-4C" - Bluetooth MAC Address Lookup
OUI Prefix Company
10:45:F8 LNT-Automation GmbH

LNT-Automation GmbH
Hans-paul-kaysser-Str. 1 ·
71397 Leutenbach
von vleeuwen
24 Dez 2023, 14:12
Forum: Robo Pro / Computing / Software
Thema: Überblick verloren
Antworten: 26
Zugriffe: 1911

Re: Überblick verloren

BTSC
It looks like the MAC address for this device.
xx:xx:xx:xx:xx:xx
See also: https://en.wikipedia.org/wiki/MAC_address
von vleeuwen
23 Dez 2023, 12:23
Forum: Robo Pro / Computing / Software
Thema: Überblick verloren
Antworten: 26
Zugriffe: 1911

Re: Überblick verloren

Not yet mentioned are: MQTT (for communication), JSON (for content), ECMAscript (Jscript), XML technology (including: HTML), CivetWeb (available on TXT: SQLight (data storage), LUA). These are necessary/usable in relation to Python, C++ (including C) partly with the TXT and partly with TXT4.0/RX ===...
von vleeuwen
21 Dez 2023, 14:04
Forum: Robo Pro / Computing / Software
Thema: Überblick verloren
Antworten: 26
Zugriffe: 1911

Re: Überblick verloren

Robo Pro coding
von vleeuwen
06 Aug 2023, 12:53
Forum: Robo Pro / Computing / Software
Thema: Gestensensor mit Python auslesen
Antworten: 3
Zugriffe: 724

Re: Gestensensor mit Python auslesen

https://www.broadcom.com/products/optical-sensors/integrated-ambient-light-and-proximity-sensors/apds-9960 data sheet with I2C commands. Python lib for the APDS9660. https://pypi.org/project/apds9960/ Circuit Python lib + description https://docs.circuitpython.org/projects/apds9960/en/latest/api.html
von vleeuwen
20 Jul 2023, 14:44
Forum: fischertechnik allgemein
Thema: Nederlands fischertechnik forum
Antworten: 5
Zugriffe: 2835

Re: Nederlands fischertechnik forum

Opvallend dat je eerst de naam fischertechnik in je adres gebruikte en dat die nu veranderd is in ftnl. Via online vertaalprogramma's zoals Google translate zijn de discussie op dit forum vrij goed te volgen. Het toevoegen van een automatische vertaleroptie aan het FT-community internationale forum ...
von vleeuwen
19 Jul 2023, 08:42
Forum: fischertechnik allgemein
Thema: Nederlands fischertechnik forum
Antworten: 5
Zugriffe: 2835

Re: Nederlands fischertechnik forum

@Lucky-Ramses Je gebruikt in je domeinnaam Fischertechnik. Ik hoop dat je daarvoor hun toestemming hebt verkregen? Anders loop je de kans dat je problemen gaat krijgen. @Lucky-Ramses You use Fischertechnik in your domain name. I hope you got their permission for that? Otherwise, you run the risk of ...
von vleeuwen
19 Jul 2023, 08:39
Forum: fischertechnik allgemein
Thema: Nederlands fischertechnik forum
Antworten: 5
Zugriffe: 2835

Re: Nederlands fischertechnik forum

Lijkt mij niet zo handig. Versplintering van informatie. Het zou beter zijn als er aan dit internationale forum een automatische vertaler toegevoegd zou worden. Zeker voor de software, omdat de documentatie altijd in het Engels is, zou het handiger zijn als de voertaal Engels zou worden. Doesn't see...
von vleeuwen
04 Jun 2023, 22:03
Forum: Robo Pro / Computing / Software
Thema: TXT update failed
Antworten: 14
Zugriffe: 1682

Re: TXT update failed

It does work with every USB to serial converter
Like the ADA-fruit ADA-284 FTDI friend
https://www.adafruit.com/product/284