pneumatic 4/3

Alles rund um TX(T) und RoboPro, mit ft-Hard- und Software
Computing using original ft hard- and software
Forumsregeln
Bitte beachte die Forumsregeln!
Antworten
Benutzeravatar
bluatigro
Beiträge: 22
Registriert: 25 Jun 2018, 15:44

pneumatic 4/3

Beitrag von bluatigro » 23 Jan 2019, 15:15

i want to have a 4/3 electronic air switch
it is posible to build one whit some electronic FT air switches
but the i have to do eletronics whit diodes
and i can not sorder because of my eye's [ i see 30% }

wil there be a 4/3 sswitch in the future ?

this wil make thing's a lot easyer

Benutzeravatar
steffalk
ft:pedia-Herausgeber
Beiträge: 1792
Registriert: 01 Nov 2010, 16:41
Wohnort: Karlsruhe
Kontaktdaten:

Re: pneumatic 4/3

Beitrag von steffalk » 23 Jan 2019, 20:17

Hello bluatigro,

as the fischertechnik magnet air switch is a 3/2 (with one being the free air and not connectable), you could simulate 1 * 4/3 using 2 * 3/2 (if you just intend to let one cylinder go in both directions). One of the 2 valves needs just to be inverted (using some form of "not" logic).

Good luck!
Stefan

Antworten