i want to have a 4/3 electronic air switch
it is posible to build one whit some electronic FT air switches
but the i have to do eletronics whit diodes
and i can not sorder because of my eye's [ i see 30% }
wil there be a 4/3 sswitch in the future ?
this wil make thing's a lot easyer
pneumatic 4/3
Forumsregeln
Bitte beachte die Forumsregeln!
Bitte beachte die Forumsregeln!
- steffalk
- ft:pedia-Herausgeber
- Beiträge: 1794
- Registriert: 01 Nov 2010, 16:41
- Wohnort: Karlsruhe
- Kontaktdaten:
Re: pneumatic 4/3
Hello bluatigro,
as the fischertechnik magnet air switch is a 3/2 (with one being the free air and not connectable), you could simulate 1 * 4/3 using 2 * 3/2 (if you just intend to let one cylinder go in both directions). One of the 2 valves needs just to be inverted (using some form of "not" logic).
Good luck!
Stefan
as the fischertechnik magnet air switch is a 3/2 (with one being the free air and not connectable), you could simulate 1 * 4/3 using 2 * 3/2 (if you just intend to let one cylinder go in both directions). One of the 2 valves needs just to be inverted (using some form of "not" logic).
Good luck!
Stefan