RoboPro 4.4.3

Alles rund um COMPUTING inkl. Microcontroller & Co.
Everything about COMPUTING incl. Microcontrollers
Forumsregeln
Bitte beachte die Forumsregeln!

Re: RoboPro 4.4.3

Beitragvon chehr » 23 Aug 2018, 14:58

Hello eliseur

wrt https://forum.ftcommunity.de/viewtopic.php?f=21&t=4914, I had a similar problem which is solved, now by re-installation of the USB driver as described in https://forum.ftcommunity.de/viewtopic.php?f=8&t=4899#p35604. I had no access to the TXT via USB, only via WLAN or BT
So I would propose to try again updating the TXT controller after re-installation of the USB Driver.
It was not feasible to update the TXT via WLAN, the error code was as shown in https://forum.ftcommunity.de/viewtopic.php?f=8&t=4899#p35599.

Regards
Christian
chehr
 
Beiträge: 157
Registriert: 07 Apr 2015, 21:07
Wohnort: Friedrichshafen

Re: RoboPro 4.4.3

Beitragvon eliseur » 24 Aug 2018, 09:16

Danke Christian

My problem is not that the update did not work: it has worked. The problem is that after the update, the connection with the controller doesn't work , via usb, bluetooth or wlan:
The Test function of Robopro indicates "state of port: stopped".
The camera images do no more show in Robopro, and the sound functions of the controller do not work.
The origin of the problem is not the driver, I guess, because then connection should work through Wlan.
I suspect that something went wrong with the update of the firmware of the controller, or that the controller itself is noit fir for the 4.4.3 firmware.

Kind regards,
eliseur
 
Beiträge: 6
Registriert: 17 Aug 2018, 15:10

Re: RoboPro 4.4.3

Beitragvon calcman » 09 Feb 2019, 14:57

hamlet hat geschrieben:Hallo Community,
Ein klitzekleines "sudo" vor dem "new_root_password.sh"-Aufruf hilft ungemein:[code] _____ _____ _ _
| ___|_ _| | |___ _| |_
| |_ | |_____| __\ \/ / __|
| _| | |_____| |_ > <| |_
|_| |_| \__/_/\_\\__|

Welcome to FT-txt

$ sudo /usr/sbin/new_root_password.sh 99
....


Hmmm, klingt alles gut und vernüftig, bei mir will der TXT aber jetzt gerne ein Passwort haben, ich vermute mal das root-pw . Und da beisst sich die Katze in den Schwanz. Hat irgendjemand eine gute Idee?

Ach ja und noch was: Beim Update (4.2.4 -> 4.4.4.) hat der TXT seinen Namen geändert. Von TXT-3173 nach TXT-0245. Ist das ein Problem, hat das noch jemand erlebt?
calcman
 
Beiträge: 1
Registriert: 09 Feb 2019, 14:49

Re: RoboPro 4.4.3

Beitragvon vleeuwen » 09 Feb 2019, 15:39

That is normal. The TXT gets a new ID.
Every update the complete settings will be renew.
So after an update and before you are able to connect over WLAN you need to renew the WLAN settings (SSID and Keyword) on the TXT.
Also the uploaded programs and SLI's need to be uploaded again.

After an update you will need to restart the TXT with power off/power on.

The update of the TXT firmware is done on the TXT itself.
RoboPro takes only care for the upload of the installation file.
It is also possible to create a bootable SD-card with the 4.4.4.0 installation software on it, see also the fischertechnik website.
Benutzeravatar
vleeuwen
 
Beiträge: 1003
Registriert: 31 Okt 2010, 23:23
Alter: 63

Vorherige

Zurück zu Robo Pro / Computing / Software

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 3 Gäste