Stromstärke und U/min des XS Motors

Alles rund um TX(T) und RoboPro, mit ft-Hard- und Software
Computing using original ft hard- and software
Forumsregeln
Bitte beachte die Forumsregeln!
Antworten
robopro
Beiträge: 55
Registriert: 08 Nov 2010, 18:57

Stromstärke und U/min des XS Motors

Beitrag von robopro » 20 Nov 2010, 15:05

Hallo,
weis jemand wie viel A der XS Motor benötigt und wie viele U/min er erreichen kann (bei voller Leistung)?
Zuletzt geändert von robopro am 20 Nov 2010, 15:12, insgesamt 2-mal geändert.
Grüße robopro!
Ohne ft ist alles doof!

werner
Beiträge: 117
Registriert: 05 Nov 2010, 15:42
Wohnort: Hildesheim

Re: Stromstärke und U/min des XS Motors

Beitrag von werner » 20 Nov 2010, 15:11

Hallo,
6000 U/min (Leerlauf), 9V, max.1W (=> ca. 111mA ;) )
Gruß aus Hildesheim, WERNER
Wer Rechtschreibfehler findet darf sie behalten ;)
YouTube: http://www.youtube.com/ftcwerner

vleeuwen
Beiträge: 1557
Registriert: 31 Okt 2010, 22:23
Wohnort: Enschede (NL)
Kontaktdaten:

Re: Stromstärke und U/min des XS Motors

Beitrag von vleeuwen » 20 Nov 2010, 20:42

The revolutions per minute and the current that a motor will consume, is depending on the load.
To much load will lead to a lower level of RPM and a higher current level.
Because load [W] =U [V] x I [A], a heave load could demage this type of motors.
Pay attention when you are using the PWM (power level control of the TX-C or RoboInt).
PWM is only controlling the time that the voltage is available, it is not controllin the RPM or the current.

The TX-C and the Robo Interface are limited to 250 mA for each motor connection.
software enigineer/teacher/advisor
Google translate
http://tescaweb.nl/Carel/?p=713

robopro
Beiträge: 55
Registriert: 08 Nov 2010, 18:57

Re: Stromstärke und U/min des XS Motors

Beitrag von robopro » 21 Nov 2010, 11:35

Hallo,
ich meine im Leerlauf.

Grüße robopro
Grüße robopro!
Ohne ft ist alles doof!

werner
Beiträge: 117
Registriert: 05 Nov 2010, 15:42
Wohnort: Hildesheim

Re: Stromstärke und U/min des XS Motors

Beitrag von werner » 21 Nov 2010, 12:10

werner hat geschrieben:...(Leerlauf)...
Hab ich doch auch geschrieben :D
Gruß aus Hildesheim, WERNER
Wer Rechtschreibfehler findet darf sie behalten ;)
YouTube: http://www.youtube.com/ftcwerner

robopro
Beiträge: 55
Registriert: 08 Nov 2010, 18:57

Re: Stromstärke und U/min des XS Motors

Beitrag von robopro » 21 Nov 2010, 12:35

Hallo,
sorry werner habe ich irgendwie überlesen!
Danke für deine Auskunft!
Grüße robopro!
Ohne ft ist alles doof!

robopro
Beiträge: 55
Registriert: 08 Nov 2010, 18:57

Re: Stromstärke und U/min des XS Motors

Beitrag von robopro » 21 Nov 2010, 12:44

Hallo,
aber eigentlich müsste die Stromstärke 9V*1W=9A sein.
Grüße robopro!
Ohne ft ist alles doof!

Ad2
Beiträge: 306
Registriert: 31 Okt 2010, 22:20

Re: Stromstärke und U/min des XS Motors

Beitrag von Ad2 » 21 Nov 2010, 13:31

Na zurueck in die Schule: P[W]=I[A]*U[V] also 0.111A

Wie gesagt, das tatsachliche verbrauch haengt von der Belastung ab.

Ad

robopro
Beiträge: 55
Registriert: 08 Nov 2010, 18:57

Re: Stromstärke und U/min des XS Motors

Beitrag von robopro » 22 Nov 2010, 17:08

Hallo,
sorry! Ich habe es verdreht.
Und nochmal Danke!
Grüße robopro!
Ohne ft ist alles doof!

Antworten