Ein Fischertechnik 3D-Printer gibt es schon verschiedene im FT-Community-Bilderpool:
http://www.ftcommunity.de/details.php?image_id=23970
http://www.ftcommunity.de/categories.ph ... begriff=3D
http://www.ftcommunity.de/details.php?i ... 23351#col3
Auch interessant ist für nur $ 1225,-- :
http://www.makerbot.com/
Grüss,
Peter
Poederoyen NL
3D-Printer
Forumsregeln
Bitte beachte die Forumsregeln!
Bitte beachte die Forumsregeln!
- Peterholland
- Beiträge: 324
- Registriert: 01 Nov 2010, 22:28
- Wohnort: Poederoyen NL
3D-Printer
Peter Poederoyen NL
- Peterholland
- Beiträge: 324
- Registriert: 01 Nov 2010, 22:28
- Wohnort: Poederoyen NL
Re: 3D-Printer
Heute habe ich ein interessanter Email + Weblink empfangen:
> On January 5, 2011 07:12:09 pm Tim Schmidt wrote:
>> I've created a wiki page for the MCAD library of OpenSCAD functions
>> here: http://reprap.org/wiki/MCAD
>>
>> Just thought I'd remind everyone about MCAD, and see if I could drum
>> up some more contribution. Any new ideas welcome!
>>
>> --tim
>>
>
> For 1x1 beam, would it make sense to be able to do t-slot on one or
> more of the long sides?
>
> I was looking at Rozek, Gurten, and Damen's
> FTIStrap, which integrates with 1x1 t-slot a bit:
> http://reprap.org/wiki/FTIStrap#Copies_of_the_FTIStrap
>
Grüss,
Peter
Poederoyen NL
> On January 5, 2011 07:12:09 pm Tim Schmidt wrote:
>> I've created a wiki page for the MCAD library of OpenSCAD functions
>> here: http://reprap.org/wiki/MCAD
>>
>> Just thought I'd remind everyone about MCAD, and see if I could drum
>> up some more contribution. Any new ideas welcome!
>>
>> --tim
>>
>
> For 1x1 beam, would it make sense to be able to do t-slot on one or
> more of the long sides?
>
> I was looking at Rozek, Gurten, and Damen's
> FTIStrap, which integrates with 1x1 t-slot a bit:
> http://reprap.org/wiki/FTIStrap#Copies_of_the_FTIStrap
>
Grüss,
Peter
Poederoyen NL
Peter Poederoyen NL