I²C speed stuck at 400 MHz on Robotics TXT

Hier habt Ihr die Möglichkeit direkt mit dem fischertechnik Team in Kontakt zu treten
Here you have the Possibility to get in direct contact with the fischertechnik-Team

Moderator: fischertechnik Mitarbeiter

Forumsregeln
Bitte beachte die Forumsregeln!

In dieser Unterkategorie können nur fischertechnik-Mitarbeiter und Moderatoren antworten!
Antworten
Rei Vilo
Beiträge: 94
Registriert: 19 Dez 2015, 15:39

I²C speed stuck at 400 MHz on Robotics TXT

Beitrag von Rei Vilo » 22 Jul 2019, 08:57

As per TXT and I2C bus speed, it looks like the issue I reported 13 January 2016 is still open.

Running the exact same program on RoboPro but targeting RoboTX and then Robotics TXT
Even when the speed is set to 100 kHz, the Robotics TXT I²C bus runs at 400 kHz on the Robotics TXT.
image001.jpg
image001.jpg (11.6 KiB) 65742 mal betrachtet
On the RoboTX, 101.1 kHz
image002.jpg
image002.jpg (9.87 KiB) 65742 mal betrachtet
On the Robotics TXT, 383.1 kHz
image003.jpg
image003.jpg (9.8 KiB) 65742 mal betrachtet
Could you please fix this issue? Thank you!

Antworten