ftduino

Ersatz- und Fremdteile, Modifikationen, etc.
Special Hints - Spare- & foreign parts, Modifications, etc.

Moderator: Jan3D

Forumsregeln
Bitte beachte die Forumsregeln!
evertdankert
Beiträge: 31
Registriert: 13 Dez 2018, 08:01

ftduino

Beitrag von evertdankert » 13 Dez 2018, 08:09

Hi,

I have a ftduino and it comes with new libraries. Also with new commands, unknown to arduino itself. I am looking for an overview and function of the specific ftduino command lines (for eg "ftduino.motor_set"). Can anyone help me? I can read German; the writing is just horrible for me:)

Benutzeravatar
PHabermehl
Beiträge: 2429
Registriert: 20 Dez 2014, 22:59
Wohnort: Bad Hersfeld

Re: ftduino

Beitrag von PHabermehl » 13 Dez 2018, 10:09

https://www.MINTronics.de -- der ftDuino & TX-Pi Shop!

viele Grüße
Peter

evertdankert
Beiträge: 31
Registriert: 13 Dez 2018, 08:01

Re: ftduino

Beitrag von evertdankert » 13 Dez 2018, 16:24

Of course I have checked that. But it contains NO overview on commands, etc. Please read my question again.
Zuletzt geändert von evertdankert am 14 Dez 2018, 10:02, insgesamt 1-mal geändert.

Benutzeravatar
PHabermehl
Beiträge: 2429
Registriert: 20 Dez 2014, 22:59
Wohnort: Bad Hersfeld

Re: ftduino

Beitrag von PHabermehl » 13 Dez 2018, 16:47

No reason to get impolite.

The manual I linked contains all commands of both the ftduino_simple and ftduino library for the Arduino IDE, see chapter 9

So please check the manual again.

Kind regards
Peter
https://www.MINTronics.de -- der ftDuino & TX-Pi Shop!

viele Grüße
Peter

evertdankert
Beiträge: 31
Registriert: 13 Dez 2018, 08:01

Re: ftduino

Beitrag von evertdankert » 13 Dez 2018, 17:35

I am not unpolite; your answer is just not an answer to my question. Chapter 9 does not give the answers. Read again. Please.

Benutzeravatar
PHabermehl
Beiträge: 2429
Registriert: 20 Dez 2014, 22:59
Wohnort: Bad Hersfeld

Re: ftduino

Beitrag von PHabermehl » 13 Dez 2018, 18:08

Then sorry for my answer. Obviously I didn't understand correctly.

Kind regards
Peter
https://www.MINTronics.de -- der ftDuino & TX-Pi Shop!

viele Grüße
Peter

evertdankert
Beiträge: 31
Registriert: 13 Dez 2018, 08:01

Re: ftduino

Beitrag von evertdankert » 13 Dez 2018, 18:20

Doesn't matter:)

Benutzeravatar
EstherM
Beiträge: 1466
Registriert: 11 Dez 2011, 21:24

Re: ftduino

Beitrag von EstherM » 13 Dez 2018, 19:08

Dear evertdankert,
the most recent version of the ftduino manual has more than 130 pages on programming. I am not aware on any more information on the ftduino. Unfourtunately for you, there is no English description for the system. If you can't find there what you need, I would recommend you to ask specific questions in this forum. I'm quite sure that somebody will help you. We just need to understand what you want to do and what your problems are.
Best regards
Esther

evertdankert
Beiträge: 31
Registriert: 13 Dez 2018, 08:01

Re: ftduino

Beitrag von evertdankert » 14 Dez 2018, 10:00

I have the manual as said before. It does not contain an overview. Like said before:) Ah, leave it, I will try it somewhere else to inform weather it exists. Thank you for taking the trouble.

Benutzeravatar
Bjoern
Beiträge: 630
Registriert: 04 Jan 2018, 12:34

Re: ftduino

Beitrag von Bjoern » 14 Dez 2018, 10:48

Hi,

why not just contacting Till directly? Pretty sure he can send you some more info.

And ftduino.motor_set(Ftduino ::M1, Ftduino ::LEFT);

First parameter is the motor. So use M1 to M4 for it. Second parameter is direction. Use LEFT, RIGHT or OFF for it.

But I also don´t know exactly what kind of info you want to have.

Björn
https://gundermann-software.de/shop/
Der Shop für viele Community Projekte

Benutzeravatar
Kali-Mero
Beiträge: 595
Registriert: 21 Nov 2017, 12:28
Wohnort: Karlsruhe
Kontaktdaten:

Re: ftduino

Beitrag von Kali-Mero » 14 Dez 2018, 13:58

Hi evertdankert,

I think the chapter 9 in the manual is very helpful for you. There are the explanations for the libraries "ftduinosimple" and "ftduino". Try to translate them with Google-translator and I think you can find, what you are searching for. Even an overview of the commands you haven't found yet ;-)

Believe me, even I found it (and you can ask my wife, I'm a very bad searcher)

Cheers
Kali

evertdankert
Beiträge: 31
Registriert: 13 Dez 2018, 08:01

Re: ftduino

Beitrag von evertdankert » 14 Dez 2018, 20:17

.........................................

evertdankert
Beiträge: 31
Registriert: 13 Dez 2018, 08:01

Re: ftduino

Beitrag von evertdankert » 14 Dez 2018, 20:18

Kali-Mero hat geschrieben:Hi evertdankert,

I think the chapter 9 in the manual is very helpful for you. There are the explanations for the libraries "ftduinosimple" and "ftduino". Try to translate them with Google-translator and I think you can find, what you are searching for. Even an overview of the commands you haven't found yet ;-)

Believe me, even I found it (and you can ask my wife, I'm a very bad searcher)

Cheers
Kali
Read the above please. Thank you.

Benutzeravatar
The Rob
Moderator
Beiträge: 968
Registriert: 03 Dez 2015, 12:54

Re: ftduino

Beitrag von The Rob » 14 Dez 2018, 20:19

evertdankert hat geschrieben:Read please.
I think it's clear that you want an overview, but by reading your posts it is not clear in which way the existing overview does not fulfill your needs.
Please elaborate, instead of constantly telling people to read your posts again and again.

evertdankert
Beiträge: 31
Registriert: 13 Dez 2018, 08:01

Re: ftduino

Beitrag von evertdankert » 14 Dez 2018, 20:28

Well, it is not that complicated. An overview is an overview. There is no overview in the manual. Yes, in the manual there is a chapter (9) with commands, but it is not an overview. So we can discuss this for years. But, like I said before, leave it. That is why I said 'read'. Leave it.

juh
Beiträge: 903
Registriert: 23 Jan 2012, 13:48

Re: ftduino

Beitrag von juh » 14 Dez 2018, 22:31

Evert, do you happen to be the user FFPBar at thingiverse?

Lars
Beiträge: 564
Registriert: 25 Okt 2016, 21:50

Re: ftduino

Beitrag von Lars » 14 Dez 2018, 22:37

Hallo evertdankert,
evertdankert hat geschrieben:I have a ftduino and it comes with new libraries. Also with new commands, unknown to arduino itself.
what Do you have in mind when using the word "new"? I think that you rather think of "own commands" or "special commands".
evertdankert hat geschrieben:I am looking for an overview and function of the specific ftduino command lines (for eg "ftduino.motor_set").
ftduino.motor_set() is explained on page 128 (Chapter 9 "Bibliotheken", paragraph 9.1.5). As far as I'm informed there isn't any further or alternative documentation available.

Mit freundlichen Grüßen
Lars

evertdankert
Beiträge: 31
Registriert: 13 Dez 2018, 08:01

Re: ftduino

Beitrag von evertdankert » 15 Dez 2018, 07:46

I give up :D :D :D :D :D

evertdankert
Beiträge: 31
Registriert: 13 Dez 2018, 08:01

Re: ftduino

Beitrag von evertdankert » 15 Dez 2018, 07:47

Lars hat geschrieben:Hallo evertdankert,
evertdankert hat geschrieben:I have a ftduino and it comes with new libraries. Also with new commands, unknown to arduino itself.
what Do you have in mind when using the word "new"? I think that you rather think of "own commands" or "special commands".
evertdankert hat geschrieben:I am looking for an overview and function of the specific ftduino command lines (for eg "ftduino.motor_set").
ftduino.motor_set() is explained on page 128 (Chapter 9 "Bibliotheken", paragraph 9.1.5). As far as I'm informed there isn't any further or alternative documentation available.

Mit freundlichen Grüßen
Lars
Everything was said already:)

juh
Beiträge: 903
Registriert: 23 Jan 2012, 13:48

Re: ftduino

Beitrag von juh » 15 Dez 2018, 10:49

evertdankert hat geschrieben:Everything was said already:)
No.

You never made the effort to clarify your problem, even if a bunch of people tried really hard to be helpful.

I feel very much reminded of an exchange with user FFBbar at thingiverse. Are you sure you are not the same person?

Jan

Antworten