Nochmal GraviTrax + fischertechnik

Vorstellung von 3D-Druck-Teilen, Fragen zu 3D-Druckern, usw.
Discussion of 3D printed parts, Questions and answers on 3D printers and printing, etc.

Moderator: Jan3D

Forumsregeln
Bitte beachte die Forumsregeln!
Antworten
Benutzeravatar
PHabermehl
Beiträge: 2429
Registriert: 20 Dez 2014, 22:59
Wohnort: Bad Hersfeld

Nochmal GraviTrax + fischertechnik

Beitrag von PHabermehl » 18 Nov 2018, 21:26

https://www.MINTronics.de -- der ftDuino & TX-Pi Shop!

viele Grüße
Peter

fotoopa
Beiträge: 312
Registriert: 05 Okt 2017, 11:44
Wohnort: Belgie
Kontaktdaten:

Re: Nochmal GraviTrax + fischertechnik

Beitrag von fotoopa » 19 Nov 2018, 18:24

I should also use this type of trackball. It looks very nice for the grandchildren. Basic version is expensive, but since you can make things yourself via 3D prints, it becomes interesting. Well done!
Much can be achieved together with the Fischertechnik combination.

Frans.

Benutzeravatar
PHabermehl
Beiträge: 2429
Registriert: 20 Dez 2014, 22:59
Wohnort: Bad Hersfeld

Re: Nochmal GraviTrax + fischertechnik

Beitrag von PHabermehl » 19 Nov 2018, 22:30

Especially younger kids succeed much faster with this one than with the ft tracks. As they usually do not have much patience, that's clearly an advantage. And in combination with ft, everything is possible. Almost...

Kind regards
Peter
https://www.MINTronics.de -- der ftDuino & TX-Pi Shop!

viele Grüße
Peter

Antworten